Sale!

Joyetech Upgraded eGrip 20W VV/VW 1500mAh kit with OLED Screen (CS)

2,750.00 1,250.00

Joyetech eGrip OLED VW MOD, the first built-in atomizer kit from Joye! Now it comes with OLED screen showing watts, volts and ohms based on original eGrip.

SKU: ak-egrip-oled Category:

Description

Product introduction

Joyetech eGrip OLED VW MOD, the first built-in atomizer kit from Joye! Now it comes with OLED screen showing watts, volts and ohms based on original eGrip. It has a transparent liquid window and 360-degree wattage regulation ring.

Parameters

Size: 46.4mm X 20.4mm X 99.5mm(including mouthpiece)
Capacity: 1500mAh
Output mode: VV (2.0V to 8.0V) /VW (5W to 20W) Mode
E-juice Capacity: 3.6ml

colour – silver

plug – Euro plug

oyetech eGrip OLED kit comes with

  • 1× eGrip Mouthpiece
  • 1× eGrip OLED MOD
  • 2× eGrip CS Atomizer Head
  • 1× eGrip Atomizer Base
  • 1× 1A Wall Adaptor
  • 1× USB Cable
  • 1× Manual & Warranty Card

Features

1. Power: 20W voltage regulation (from 5W to 20W), and 2.0V to 8.0V adjustable
2. Transparent window, convenient filling
3. Air inlet regulation

4. Incomparable design: integration of atomizer and battery
5. All-metal surface, compact, exquisite and portable
6. Replaceable special eGrip CS Atomizer Head (1.5ohm)

 

Output wattage adjustment
In this VW mode, wattage output can be adjusted by rotating the regulation ring clockwise or counterclockwise. With the wattage increasing, the vapor speed will be faster and you can enjoy a huger vapor.

 

Air inlet regulation
Spin the adjustable screw on the side of the bottom. Contra-rotate the screw will loosen the screw. The looser the screw is, the bigger the air inlet is.

 

Liquid filling
Push up the lid on the side of eGrip body, then slowly refill the liquids into the hole. And do remember to lock the cap after finishing filling.

 

Atomizer Head replacement

Unscrew the big screw at the bottom with a coin, and the atomizer head is located on the base of it. Simply unscrew the atomizer head and replace a new one.
Charging
Plug the USB cable to the eGrip body from the bottom, and connect it to the wall adaptor or other power source such as a computer. (it can be used whilst on charge)

 

Additional information

Brand

Joyetech

Colour

Silver