Simple Ecigarette Coils Making Jig

195.00

It is a jig for coil making for RDA or RBA. With this jig, users can make coils easily.
There is one magnetic bore pin with the diameter of 1.5mm.
In the center of the jig, there is a hole for 510 threaded atomizers. With this hole, users can open atomizers easily.

SKU: misc-coiljig Category:

Description

Image for reference only. Actual product may have minor differences.

Instructions:
1. Unscrew the wire pinch bolt and insert one end of your wire into the hole and pinch down.
2. Insert the bore into the hole.
3. Now wind your coil, very simple.

The hold on the center is for detaching the RDA base from the RDA body.
Step 1, screw the RDA on the base tightly.
Step 2, pull the top cap up.
Step 3, deck/base of RDA is there.

Unit: 1 set
Material: Aluminium alloy
Size: Height 35mm;Width 12mm;Length 45mm

Each set contains:
1pc Ecigarette Coils Making Jig Body
2pcs Screw
1pc Magnetic bore pin (1.5mm)